ENGLISH
ESPAÑOL
Product Details
Product Introduction
For processing absorbent concrete / cement floor.
Features
- Green and environmental protection;
- Sealing the base, reduce the base absorption;
- Bonding bridge effect, enhance interface adhesion;
- Economical and practical, large- area coating.
Technical Data
| Specification | Details |
|---|---|
| Color | White |
| State | Liquid |
| Solid Content | ≥17% |
| Density | 1.0kg/L |
| Consumption | About 100-150g/㎡ |
| Drying Time | 1-2 hours (depending on the temperature and humidity of the construction environment). |
Installation Guide
Applicable Subfloor :
Water-based emulsion primer, used for wall and ground absorptive base such as concrete, cement mortar, gypsum base coat, close the basic pores, reduce the absorbability of porous base; Enhance the interface adhesion of the base, play the role of bonding bridge. After brushing the primer at the base, the self-leveling construction can be carried out.
Primary Treatment:
The base should be solid, smooth, dry, clean, no cracks, no grease, no film removal agent. If the surface of the base is loose or large area of floating slurry, shot peening should be treated; High moisture content of the grassroots need to do professional moistureproof treatment. Polish the base and vacuum before applying the bottom coat.
Construction Method:
Cement mortar floor interface treatment by MSYH M318，Dilute with water according to the absorption of the base and then roll with the wool roller . Subfloor required for highly absorbent roll twice, you do not need watered concrete floor directly roll . Tools and containers can be cleaned with water .
Note:
The product must be used at 5℃ to 35℃. The data provided in this manual is obtained at 23℃±2℃ and 50-55% relative humidity. Under different temperature and humidity conditions, the curing time will be extended or shortened accordingly.
Packaging and Storage:
20kg or 5kg plastic pails. This product must be stored in 5℃-35℃ room, prevent freezing, exposure. Shelf life is 12 months.
